Wholesale 4120 Soy Blend Pillar Wax

Kerax KeraSoy 4120 Soy Blend Pillar Wax KeraSoy 4120 Pillar Wax is a soy blend specifically developed for the production of pillar candles and wax melts. It offers a firm structure, smooth finish and reliable performance, making it ideal for moulded candle designs and professional results. This wax is suitable for use with fragrance oils and oil soluble dyes, allowing you to create a wide range of scented and coloured products. It is biodegradable, vegan friendly and produced without the use of animal products or animal testing. KeraSoy 4120 does not require additional additives other than fragrance and colour, keeping your formulation simple and consistent. Why choose KeraSoy 4120 Soy blend pillar wax designed for moulded candles and wax melts Firm finish with good structure and mould release Suitable for fragrance oils dyes and mica powders Biodegradable vegan friendly and palm free No additives required other than fragrance and colour Suitable for remelting and reuse Recommended usage guidelines Melting temperature 70 to 75°C Fragrance addition 65 to 70°C Pouring temperature 55 to 65°C Recommended fragrance load 5 to 10 percent always test Temporary heating up to 90°C is acceptable if cooled quickly however avoid prolonged high temperatures to prevent discolouration Colour Suitable for powder dyes liquid dyes chips blocks and mica powders For powder dyes heat wax to around 75°C and mix until fully dissolved Dyes can also be pre mixed into fragrance before adding to wax For richer colours a small amount of black dye can be added Fragrance Designed for use at 5 to 10 percent fragrance load Fragrance oils developed for natural waxes are recommended Some fragrances may affect finish or burn performance so full testing is essential Wicking Natural waxes typically require larger wick sizes than paraffin Wick choice will vary depending on fragrance colour and candle size Too large may cause soot and fast burn Too small may cause tunnelling Keep wicks trimmed to approximately ¼ inch Allow candles to cure for at least 48 hours before test burning Pouring and cooling Pour temperatures may vary depending on mould type and size Pouring at 55 to 65°C can improve mould release Pour into pre heated moulds if required Allow candles to cool undisturbed at room temperature Leave for at least 48 hours before test burning Double pour