Wholesale Tung Oil Finish - Ready-to-Use 50/50 Blend

Tung Oil Finish - Ready-to-Use 50/50 Blend Premium ready-to-use tung oil finish expertly blended with 50% Pure Tung Oil and 50% Pure Citrus Solvent. This traditional hand-rubbed finish formula is ready to apply straight from the container, providing deep penetration, beautiful grain enhancement, and long-lasting protection for interior wood surfaces. Key Features & Benefits * Ready to Use: Pre-mixed 50/50 ratio - no measuring or mixing required * 100% Pure Tung Oil: American-grown pure tung oil for superior protection * Pure Citrus Solvent: Natural, plant-based solvent with pleasant citrus scent * Deep Penetration: Soaks into wood fibers for lasting protection from within * Hand-Rubbed Finish: Creates classic, warm, natural appearance * Enhances Grain: Brings out the natural beauty and character of wood * Food Safe: Safe for cutting boards, countertops, and food-contact surfaces once cured * 100% Natural: No synthetic chemicals, or toxic additives * USA Based: Made with American-grown tung oil and citrus solvent * Easy Application: Perfect consistency for brush, cloth, or pad application Ideal For Furniture, cabinets, wood countertops, cutting boards, butcher blocks, interior doors, wood trim, hardwood floors, musical instruments, antique restoration, wood turnings, and any interior wood project requiring a natural, hand-rubbed oil finish. Application Instructions Preparation: * Wood must be clean, dry, and bare (no previous finish) * Sand to 150-220 grit for optimal results * Remove all sanding dust with tack cloth or vacuum * Stir/Shake Tung Oil Finish thoroughly before use * Work in well-ventilated area at 65-75°F for best results Application Steps: * Apply Liberally: Using a brush, cloth, or applicator pad, apply a generous coat of Tung Oil Finish to the wood surface * Work Into Wood: Rub the finish into the wood grain, ensuring complete saturation * Allow Penetration: Let the oil penetrate for 15-30 minutes * Wipe Off Excess: Using clean, lint-free cloths, wipe off ALL excess oil until surface feels dry to the touch * First Coat Drying: Allow 24 hours for first coat to cure * Apply Additional Coats: Repeat process for 2-4 total coats, waiting 24 hours between each coat * Light Sanding (Optional): Lightly sand with 320-400 grit between coats for ultra-smooth finish * Final Cure: Allow 7-10 days for complete cure before heavy use Coverage Approximately 400-500 square feet per gallon on first coat.