These are made to order and fresh off the DTF machine! Want it in a different color sweatshirt? Send us a message! Our preferred brand of sweatshirt is JERZEES and Gildan, however, in the event of a stock shortage we reserve the right to substitute for an alternative brand that contains the similar material blend and color. Both JERZEES and Gildan are made from 50% cotton and 50% polyester. Sweatshirt Color: Military Green Suggested Care Instructions: To keep your print vibrant, wash inside out in cold water on a gentle cycle, air dry, and avoid bleach or fabric softeners. If you need to iron ensure you do it on the reverse side with low heat. Transfer Only Instructions: Preheat the press to 300°F. Lay the garment flat and pre-press for 5–10 seconds to remove wrinkles/moisture. Place the transfer (print side down) in the desired position on the fabric. Press for 10–15 seconds with firm pressure, then peel the transfer after it cools. Recommend, post-press with parchment, Teflon or seal sheet for 5–10 seconds to set the design.