Wholesale Western DTF Ready to press

Shirt not included Ready to press DTF (Direct-to-film) transfers. DTF prints are made for most materials, cotton, polyester, and denim. You can apply DTF prints to t-shirts, hoodies, hats, shorts, pants, bags, and jackets. 𝗛𝗼𝘄 𝘁𝗼 𝗽𝗿𝗲𝘀𝘀 𝗗𝗧𝗙 𝗽𝗿𝗶𝗻𝘁𝘀 • How to press: Prepare the garment: Make sure fabric is clean, dry, and free of wrinkles. • Preheat the Press: Set the press temperature range 280-325 F, adjust according to the press you have and operational instructions. • Pre-Press Garment: Press the fabric for a short time (6seconds or so) to remove any moisture or wrinkles. • Press: Apply firm pressure for recommended time. The typical pressure rang is 30-60 PSI (medium to firm). • Cool and peel: Let the fabric cool, then slowly peel away the clear film. • Repeat: If the transfer isn't fully adhered, you can try smoothing the print and pressing again.