Wholesale Self-Adhesive Leather Laminate (A4)

Try some of our new exciting finishes for your stickers including our Matte Cross-Hatch or Leather! Add a refined, fabric or skin-like finish to your stickers and prints with our anti-glare, no fingerprint Matte Laminates. Details: * Leather (Leather-Look) Matte Laminate * 80 Micron/3.1 Mil Thickness * Sheet Size: A4 - Approx: H29.7cm x 21cm 📐 * Designed for easy application by hand, cold laminator or roller. * Protection from Minor Scratches, Water Resistance with textured finish. * Suitable for indoor and Outdoor use with UV Protection. * Raw materials sourced from sustainability managed forests. 🌲♻️ * Packed in 70% recycled cardboard & Kraft paper packaging from responsibly managed sources. 🌲♻️ * FSC (Forest Stewardship Council) Certified 🌲♻️ CUTTING: Some cutting machines (Cricut/Silhouette) may find it difficult reading your registration marks when cross hatch laminate is applied to your materials. * We recommend you testing out a single sheet before purchasing multiple sheets. * Using a matte tape over the registration marks may help your machine with reading the registration marks. * You can cut down your sheets so that they sit inside of your registration marks/area. Instructions for Use By Hand: Peel away a small section of backing sheet at the top of the laminate. Lay flat and Stick this section to your media of choice. Pull away the backing sheet whilst using a squeegee, ruler or large flat object to push laminate down flat. By Laminator: Set your Laminating machine to cold setting before again peeling away a small section of backing sheet at the top of the laminate. Lay flat and Sticker the section to your media of choice. Put this section into your laminator. Then pull away the backing sheet as your media is fed through the cold rollers of your laminator. Note: The more pressure you are able to apply the cleaner the finish of the Gloss. Apply this pressure with a soft instrument or Rolling machine to reduce scratches on final look.