Wholesale AC Color Pour Resin Silicone Mold Maker

Create perfect resin duplicates of virtually anything with this resin mold maker. This comes with one Part A and one Part B bottle. Each bottle contains 3.5 ounces. . How to Use: * Adhere the flat side of your item into a plastic container large enough to allow your item to be fully covered. (Or you can use an anchor method instead - see alternate instructions below for details.) Keep in mind that the larger the container, the more mold maker you will need. * Mix equal parts of room temperature Part A and Part B in a plastic cup. Do not use a silicone cup. Stir slowly and thoroughly for 2-3 minutes. * Pour mixture in the container with the item. Make sure that it completely covers the item. Pour slowly to reduce bubbles. * Silicone mold maker cures in about 12 hours. Slowly and carefully remove original item from the mold. * Your mold is ready to use! Follow the instructions on your resin to create duplicates of your original item. Alternate Instructions - Anchor Method * Apply an anchor to the backside of the original item. Use an anchor that is wide, like a craft stick, for best results. * Place item with anchor in an open-ended container. Keep in mind that the larger the container, the more Mold Maker you will need. Make sure that the item is suspended in the container with the anchor resting on the outside edge of the container. * Mix equal parts of room temperature Part A and Part B in a plastic cup. Do not use a silicone cup. Stir slowly and thoroughly for 2-3 minutes. * Pour mixture in the container with the item. Make sure that it completely covers the item. Pour slowly to reduce bubbles. * Silicone mold maker cures in about 12 hours. Slowly and carefully remove original item from the mold. * Your mold is ready to use! Follow the instructions on your resin to create duplicates of your original item. Download instruction PDF here.