EST Size Of Transfer: Width 10” Instructions Please Note: A Heat Press is required for these transfers. While a Cricut Handpress or Iron “will work”; We highly recommend a heat press for the smoothest quality. We are not responsible for any damages caused by an iron or easy press, so please use at your own risk. Lower temp of 200 degrees F and keep 10 seconds on front and turn inside out 20 seconds with higher temp of 300 degrees F. This way to keep the Chenille much more fluffy, because the Chenille part is too thick to pass the temp, lower temp to locate the patch first and higher temp to firm the patch well on the back side. Fabrics to Use on 100% Cotton 50/50 Cotton and Polyester 50/50 Cotton/Polyester Triblends Nylon Leather If you have not used any of these fabrics before it is best to do a test sample before pressing in bulk.