Wholesale Korlis Twin over Twin Solid Rubberwood Floor Bunk Bed

A Bunk Bed Drawn Low The Korlis bunk bed is the floor-height version of this twin over twin frame, drawn so the upper deck sits closer to the ground than a standard bunk carries it. Solid rubberwood posts stand at all four corners, joined into side rails that carry thirteen plywood slats across the upper deck, so a mattress goes down without a box spring. Guardrails enclose the upper bunk along both long sides, and the whole frame stops well under four feet, low enough to strip and make the top bed from standing rather than from the third rung. The ladder climbs at one end on flat steps drawn wider than a rung, taking a whole foot at a time. The lower bunk sits within a framed platform close to the floor. FEATURES Floor-Height Bunk Frame keeps the whole structure under four feet, so the top bunk gets stripped and made from standing instead of from partway up the ladder Low Upper Deck sets the sleeping surface closer to the ground than a standard bunk, shortening the climb to a few steps at either end of the day Wide Flat Step Ladder climbs at one end on steps drawn to take a whole foot rather than narrow rungs that ask for a careful placement each time Full-Length Top Guardrails enclose both long sides of the upper bunk along the whole sleeping surface rather than stopping partway toward the foot Solid Rubberwood Frame carries the posts, rails and guardrails in dense hardwood, holding square through years of daily climbing up and down Thirteen-Slat Upper Deck supports the mattress directly, so no box spring is needed on the top bunk and air moves freely underneath Compact Bunk Footprint fits two twin sleepers into the floor space of one bed while keeping the frame low against the wall Kids' Room Footprint works in shared bedrooms, low-ceilinged rooms and small rooms where a full-height bunk would crowd the space overhead Mattress & Capacity Mattress Size: Twin (both levels) Recommended Maximum Mattress Thickness: 6" Box Spring Required: No Foundation: Wood Slats (13 upper deck) Upper Bunk Weight Capacity: 200 lbs Lower Bunk Weight Capacity: 200 lbs Product Dimensions Overall: 77.3" L x 43.8" W x 46.6" H Bottom Bunk Headroom: 27.3" Upper Deck Height (floor to sleeping platform): approx. 29" Guardrail Height Above Upper Deck: approx. 17.6" Package Dimensions Box 1: 80.3" × 9.8" × 7.1" / 86 lbs Weight Net Weight: 79.4 lbs Gross Weight: 86 lbs In the Box 1 × Korlis Twin over Twin Floor Bunk Bed Frame with guardrails 1 × Ladder 13 × Wood slats Assembly hardware and tools 1 × Instruction manual Materials Frame and Posts: Solid Rubberwood Guardrails: Solid Rubberwood Ladder: Solid Rubberwood Upper Deck Slats: Plywood Hardware: Metal Care Instructions Dust the frame with a dry cloth, following the grain rather than working across it Wipe finished surfaces with a soft damp cloth and dry immediately so water does not sit on the finish Avoid abrasive powders, scouring pads, bleach and solvent-based cleaners on any surface Keep the frame away from radiators