Wholesale FlowCore FC12 Sand Filter Pump

Crystal-Clear Water Starts with FlowCore Powerful filtration and simple maintenance for a cleaner pool season. Pressure Gauge The built-in pressure gauge gives real-time feedback on tank pressure, so you can quickly tell when it is time to backwash and keep water flowing smoothly. Drain Valve The drain valve at the base of the tank makes it easy to remove water for winter storage, sand replacement, or filter media changes without heavy lifting. Clear Cover & Strainer The semi-transparent cover lets you check debris at a glance, while the removable strainer basket captures leaves, hair, and larger particles before they reach the tank. Sturdy Base Support The reinforced base helps absorb motor vibration, reduce noise, and keep the filter system steady during operation. Specification * Model: FC12 * Power Supply: 110-120 V/60 Hz * Sand Tank Size: 12 in * Horsepower: 0.540 HP (400 W) * Max. Water Pressure: 14.5 psi * Max. Pump Flow Rate: 2,642 GPH * Max. System Flow Rate: 1,585 GPH * Max. Head: 33 ft * Max. Filter Sand Capacity: 28.7 lb * Filter Balls Capacity: 12.1 lb * Effective Filtering Capacity: 7,925 Gal * Output Port Size: 1.5 in * Max. Liquid Temperature: 41-104 °F * Waterproof Class: IPX5 FAQs Q: Can I install this system myself? A: Yes. The package includes adapters, hose clamps, and a detailed manual to support setup. Technical support is available if you need additional guidance. Please note that pool-to-pump hoses, pool-to-tank hoses, and hard pipes are not included. Q: Is this pump compatible with my specific pool type? A: This system includes adapters for 1.25" and 1.5" hoses, fitting most above-ground pools. Q: Which filtration media can I use with this system? A: This system is dual-media compatible. You can use up to 28.7 lb of filter sand or up to 12.1 lb of filter balls. Ensure the media is properly loaded into the 12-inch tank before starting. Q: How do I know when the sand needs backwashing? A: Check the pressure gauge during operation. When the reading increases by 8–10 PSI compared with the initial pressure, perform the backwash function. Backwashing usually takes about 2 minutes or less, depending on dirt buildup. Q: Is this system compatible with saltwater? A: No. This system is not designed for saltwater pools.