Cool Flock Iron-On Patches 🔥 Now in even better quality! 🔥 Our neon flock patches provide a striking look and a velvety, high-quality surface – a real highlight for any outfit! Simply iron them onto your favorite piece with your iron or a press, and you're done! Super easy to iron on – perfect for customizing plain sweatshirts, bags, or other textiles. ✨ Why our patches? ✨ Bright neon colors for a striking look Velvety soft surface - super high quality! Easy application – no professional equipment needed - a regular iron is enough! Instructions: * Place your garment on a heat-resistant, firm surface (e.g., tiles, untreated wooden board) and position the patch at the desired spot. TIP: Cover the patch with baking paper or a thin cotton cloth to protect your iron. * Set your iron to level 2 (sometimes level 3 depending on the iron) or your press to 160°C. I always use a Cricut Mini Press. IMPORTANT: Pure steam irons are usually not suitable as they do not get hot enough and the heat is not distributed evenly. * Press the iron firmly onto the patch with a lot of pressure for 16–20 seconds. Important: Do not glide, just press firmly! * Let the patch cool completely and carefully peel off the carrier film. * Cover the patch again with baking paper and press again for 10 seconds. Alternatively, press from the back side of the fabric. This increases durability. IMPORTANT: Our flock patches have a fine contour on the carrier that remains on the carrier film after pressing. So don't be surprised :) Care instructions: * Always wash the finished textile inside out. * Do not tumble dry and never iron directly over it. * If a corner comes loose, you can usually re-press the patch. * Always use color and dirt-catching cloths to prevent discoloration. Material: Viscose (standard colors), Polyamide (neon colors)