Wholesale RF Single-Color LED Controller Kit 5–36V DC Max 8A with Remote Control - White

Single-Color RF LED Controller Kit 5-36V DC Max 8A with Remote - White Wirelessly control your single-color LED strips with this receiver + compact CR2032 remote kit. The receiver accepts 5 to 36V DC and handles up to 288W on one 8A channel. The remote features a touch wheel to adjust brightness with 4096-level resolution, 3 scene memories, 4 quick brightness presets (25/50/75/100%) and a Push-Dim input (short press = on/off, long press = gradual dimming) for a wired push-button switch. CE, RoHS, FCC certified, 5-year warranty. Technical details * Type: RF controller kit + compact remote for single-color LED strips * Input voltage: 5-36VDC * Output voltage: 5-36VDC * Output current: 1CH, max 8A * Power: 40-288W * Output type: Constant voltage * Compatible lighting type: Single-color * PWM frequency: 2000Hz (pulse-width modulation for precise brightness control without altering color) * Dimming levels: 4096 levels (12-bit) * Dimming range: 0-100% * Communication: RF 2.4GHz, range 30m in open space * Push-Dim input: Yes (allows dimming via a simple wired push-button switch without the remote) * Protection rating: IP20 (indoor) * Operating temperature: -30°C to +55°C * Receiver dimensions: 97 x 33 x 18 mm * Certification: CE RoHS FCC * Warranty: 5 years Features * 4096-level resolution with logarithmic curve: dimming follows the eye’s natural perception; transitions are imperceptible even at very low brightness * Touch wheel on the remote, with 4 brightness shortcuts (25/50/75/100%) * 3 storable scenes: save your favorite ambiance and recall it with a single press * Built-in Push-Dim input on the receiver accepts a standard push-button: short press to turn on/off, hold to dim * Built-in protections: reverse polarity, overheating, overload and short-circuit with automatic recovery — keeps your installation safe Installation & wiring Connect the power supply to the receiver’s INPUT (+/-) terminals and the LED strip to the OUTPUT terminals. To pair the remote: briefly press the receiver’s Match button, then press the on/off on the remote. To unpair: hold Match for 5 seconds. Where to use this LED controller kit? This kit is designed for all constant-voltage single-color LED strips and bars: indirect lighting for cornices and false ceilings, display case highlighting, under-cabinet kitchen lighting, stairs, signs. The ultra-fine dimming and customizable scenes make it suitable for residential interiors as well as commercial spaces.