Very Aggressive No-Rinse Stripper This fast-acting floor finish liquefier will solve stripping difficulties caused by frequent high speed burnishing, super hard urethane fortified finishes or excessive buildup. This product is designed to remove layers of floor finish in less time with less effort and no rinsing. Floors are ready to recoat without neutralizing when used as directed. Features Versatile: For use on Hard Surface Floors in a range of dilution ratios to do the job Rinse free - No alkaline residue. Low foaming. Tech Specs Color Clear, slight amber Flash Point None Fragrance Pleasant Freeze/thaw stability 3 cycles pH 13.5 - 14.0 pH @ 10% solution 12.8 Warranty 2 years Specific gravity 1.04 Directions for Use Recommended for removing water-based acrylic floor finishes from all types of resilient tile and hard surfaces. Pre-test in a small area; color bleeding or discoloration may occur on linoleum, rubber tile or asphalt tile. Not recommended for stripping linoleum or sheet vinyl floors. Sweep or dust mop the floor to remove any large debris. Dilute with warm to hot water. For normal stripping, dilute 13 oz./gal. or 100 mL/L (1:10) of water. For heavy stripping, dilute 25 oz./gal. or 200 mL/L (1:5) of water.