ID Name Tag with adhesive backed pin to attach to uniform or shirt. Sublimation leather is matte white on the front of the name badge.  Sublimation area is approximately 3"x2" and about 3/16" thick, but can vary slightly. Name tag is reinforced to provide stability. You'll want to make your design with a border roughly 1/16"-1/8" larger than the design area to ensure full coverage. ***PRESSING INSTRUCTIONS*** Press the sublimation area with the transfer paper face down on top of the substrate. Make sure to hang the non-sublimation area off the press so it doesn't melt! You can also use heat tape to help protect the black area of the wallet. Press with medium-heavy pressure at 400 degrees for 60 second. **Time/temp recommendations are just a starting point. Please test your own equipment for the correct time and temp for you.