White autoclave 8 liters class B with USB and built-in printer Warranty details Safety - It is essential that the water quality is below 20 microsiemens for the autoclave to start the cycles. - The cycle will not start if the door is not properly closed. - The automated double hydraulic locking device prevents the door from opening while the chamber is under pressure. - Safety valves prevent pressure generator and camera. - A safety thermostat prevents overheating in the chamber and generator. - An automatic safety lock prevents accidental opening of the door during the sterilization process protector automatically cuts off electrical power if there is a short circuit or the power supply is not very stable. - Failure alarm indicates a cycle failure and detailed error code. - Door alarm indicates that the door is not secured. - Low water alarm indicates when the water tank is empty or too full. Technical specifications - Voltage: 220-240 VAC; 50/60 Hz; 10A - External dimensions of the device: W x H x D: 420 x 370 x 525 mm - Tray dimensions: 265 x 130 mm - Circuit breaker: F16A / 400V - Rated power: 1500 VA - 1750W - Sterilization temperature: 121 °C / 134 °C - Distilled water tank capacity: 2.5 L - Operating temperature: 5 °C / 40 - Relative humidity: Max. 80%, non-condensing - Net weight: 37 kg - Maximum noise level: <70 dB - Atmospheric pressure: 76 kPa / 106 kPa Maintenance and error message guide for your autoclave MAINTENANCE OF YOUR AUTOCLAVE ERROR MESSAGE GUIDE Components - Distilled water tank - LCD screen - Control panel - Main switch - Key to drain distilled and used water - USB port - Internal printer (allows printing sterilization cycle reports on thermal paper after the cycle ends.) - Safety valve - Ventilation grille - Locking system - Power cable - Label Included accessories - Sterilizer - USB - 3 instrument trays - Tray support - Handle for tray extraction - Tool to adjust the door - 2 drain hoses - Door advice - Instruction manual Regulation - 93/42 / EEC Medical care directive. - 97/23 / EEC Pressure equipment directive. - EN 13060 Small steam sterilizers. - EN 61326, EN 61000 EMC. - EN 61010-1, UL 61010-1 Safety requirements. - EN 61010-2-040, IEC 61010-2-040 Particular requirements for steam sterilizers used for treatment.