Wholesale Flopoxy Fast Set Epoxy Resin + Hardener Kit

Flopoxy Fast Set Epoxy Resin & Hardener Kit ***THIS PRODUCT CANNOT BE SHIPPED INTERNATIONALLY. ANY INTERNATIONAL ORDERS CONTAINING THIS ITEM ARE SUBJECT TO BE CANCELLED AND REFUNDED*** Click HERE to download the Safety Data Sheet Part A Part B Kit Sizes Part A = Fast Set Resin, Part B = Fast Set Hardener, mixing ratio 1:1 * 16oz Kit = 8oz A + 8oz B * 0.5 Gallon Kit = 32oz A + 32oz B * 1 Gallon Kit = 0.5 gal. A + 0.5 gal. B * 2 Gallon Kit = 1 gal. A + 1 gal. B Epoxy Resin & Hardener Specifications * Ideal Curing Temp: 65-80 F * Mixing Time: Approximately 3-4 minutes (depending on amount being mixed, as well as how thoroughly it is being stirred) * Working Time: 15 minutes * Dry-to-touch: 2.5-4 hours * Full Cure: 24 hrs * Heat Tolerance: 500 Degrees Fahrenheit * Maximum recommended coating thickness: 1/8” * Maximum recommended casting thickness: ½” – even ¾” as long as total mass of pour is small * Shore D Hardness: 80D Safety First things first! ALWAYS observe these basic safety requirements. * We advise using a Respirator to protect your lungs. * Craft in a well ventilated room to protect yourself and others * Use gloves! It is important to not expose yourself or your lungs to the epoxy. * Use Safety Eye Goggles, it is important to keep your eyes and face protected from the epoxy. (Constant exposure can cause reactions to your skin or may make you allergic to the epoxy) FDA Food Safe Rating The Flopoxy product combination was tested by an independent laboratory and was found to comply with 21 CFR 175.300 (as published in the Code of Federal Regulations) for resinous and polymeric coatings that may be safely used as the food-contact surface of articles intended for use in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting, or holding food when accurately measured, thoroughly mixed, and fully cured. Prior to using accurately measured, thoroughly mixed, and fully cured epoxy-coated objects for food applications, thoroughly wash the surface with a water and dishwashing detergent solution, rinse, and allow to dry. Flopoxy Fast Set Epoxy Two Part Kit - FAQ Q- Is MakerFlo epoxy self leveling and self healing? A- Yes! MakerFlo epoxy resin is self-leveling, ensuring a smooth, even finish on flat and curved surfaces without excessive manipulation. When working with circular objects like stainless steel tumblers or resin ornaments, the epoxy naturally flows to create a seamless coat. However, due to the curved shape, excess epoxy may pool or drip