This listing is for our Pawprint Love Car Window Decal! ~ Decals are measured by WIDTH. This decal is 5 inches wide. Message us if you're interested in a custom size! ~ Includes 1 decal and application instructions. ~ Perfect for car windows, stainless steel cups, plastic, metal, electronics, notebooks, lockers, appliances, and more! Not meant for walls, silicone, or non-porous surfaces. Not microwave or food safe. ~ Made with outdoor premium vinyl, made to last up to 6 years. Please use care when applying it, as the decal is removable, but NOT reusable once it's been removed. Seller is not responsible for decals that are improperly applied. Feel free to start a conversation with me to ask any questions you may have. We'd love to see pictures of your sweet furbabies in their new Marlo Ann's Boutique accessories and officially welcome you to the Marlo Ann's Boutique family! - Hashtag #marloannsboutique on Instagram: @marloanncavalier and facebook: www.facebook.com/marloannsboutique. APPLICATION INSTRUCTIONS: 1. Thoroughly clean application surface with rubbing alcohol and allow to dry. 2. Carefully peel the backing off of the decal, making sure to not let the decal fold or wrinkle. You will now have just the clear transfer tape with the decal attached to it. 3. Carefully place the decal on the application surface, making sure not to let the decal fold or wrinkle. 4. Use a plastic razor or credit card edge to firmly scrape the decal to smooth it out and remove any bubbles. In most cases, air bubbles can be worked to the edge of the sticker, but if not, a pin hole will allow the air out and become virtually invisible. 5. Very carefully and slowly, peel one top corner of the clear carrier sheet and pull down at an angle. If the decal does not release, scrape some more and try pulling the carrier sheet again. *Do not apply on extreme cold or hot surfaces. Ideal temperature must be between 60°F and 90°F.